In most bowhunting safety studies done in recent years, most accidents are caused by using tree stands. I’ve hunted from trees more times than I can remember. I can recall some traumatic moments that I could see my entire existence flashing before my eyes which reminded me to be more cautious when hunting in high areas. Then, knock on wood, and no severe consequences had occurred; however, when the incidents took place, the thoughts about what might have been the outcome forced me to take a moment to consider the situation and make every effort to ensure that I am doing things correctly.
The benefits of tree stands are very well established, and that’s why many hunters can be found fifteen feet or more above the ground every autumn. As states have relaxed their restrictions on crossbows and bows are more popular and well-known, horizontal bowmen have gone to the trees. As a result, they’ve taken essential precautions to protect themselves in the tree stand, like wearing a full-body safety harness when they are in flight and using draw lines to pull their bows up. All well and good. However, crossbows differ from other hunting equipment in various ways, and different safety regulations apply.
How to hunt deer with hunting crossbow?
Proper Stand Placement is vital
The tree stand placement is essential, and when hunting with a crossbow, it’s even more crucial. Because of their size and length, they are also heavy. Crossbows restrict the distance that a shooter can move left or right to take an effective shot. This is a problem that could ruin a shot chance if not addressed. In most cases, tracks, trails, rub lines, and other such markers show where deer are moving, and stand placement is based on that. However, whitetail movements are uncertain at best, especially in the rut, when bucks may come from any direction.
To avoid this, it’s usually beneficial to move the stand a bit in either direction, towards the right or left, in an angle that gives you more flexibility to swing the bow. You can open up a bigger space for the target to be shot and opens up many shot possibilities instead of just covering the main trails. It’s also more secure. I still get excited whenever an enormous buck is in view. I’m sure other hunters feel the same too. Hunters may be inclined to move left or right faster than they had planned or anticipated or planned for, sometimes extending the body further out or reaching more than they ought to for a chance to maneuver around trees, branches as well as other obstacles.
Connect it to the ground
The most secure place to manually control cocking of a crossbow using the cocking rope is on the ground before getting up to a tree stand for some time. Crossbows can be cocked either at home or in the truck before bringing them into the stand to lessen the noise, but they should not be cocked inside. Even double-wide ladder stands are limited in space, and single stands and climbers are smaller. Also, there is a good amount of pressure applied to the foot stirrup while cocking the bow. The pressure applied to the bow can cause you to fall off balance, which is never something you want to do if you’re 12 or more feet away from the ground.
To the right! no, the other right!
Human bodies can turn only a certain distance, and side-to-side movement in the tree stand is limited. Right-handed shooters with a right hand can swing only to the right, while left-handed shooters are limited towards the left. Luckily, the majority of crossbows can be shot ambidextrously. One of the most effective ways to improve shot opportunities from a tree stand and restrict overreach or be too far off in either direction is to shoot left and right hand. Get your crossbow unloaded and if you’re right-handed, you can swing left and then left. If you’re left-handed, shoot right, then swing left and back. It takes some time to get used to and a lot of practice. However, shooting with either hand dramatically increases the space you can cover and increases the chances of shooting.
With a draw line
Drawing a line of withdrawal lines is the best method to bring the crossbow onto the elevated stand. Hunters should think about it as an absolute rule of thumb to always have the safety switch on and not fire an arrow before being you are sitting in the stand or secured. Depending on the person you speak to, the most efficient method to lift the bow up is to secure the draw rope to either the stock or the foot stirrup and not via the trigger housing. Of the two options, I’m a fan of and believe it’s safer to raise the bow through the stock. Here’s the reason.
I make sure to clock my bow to the ground. Even when the safety is turned off, if the bow discharges during the journey, the energy will be directed towards me, not me. This ensures that the broadheads and arrows remain in the direction of the ground, regardless of whether the quiver is mounted directly to the stock. It can also be set parallel to the limbs. When the arrows are pointed downwards and away, the possibility of one being pushed away from the quiver is reduced. Another point: when the bow comes to me, I can grasp it with the stock in the grip while keeping the limbs loaded, and broadheads pointed downwards or away. If the bow is pulled up through the stirrups, the reverse is the case. I lower my bow the same way, using the stock, and for precisely the same reasons. It shields everything from me.
Make the first shot count
Of course, the most effective and safest method to avoid the necessity of cocking your bow away from the tree stand is to make the initial shot count. This can be accomplished by constantly ranging targets once you have climbed high, waiting for the perfect shot by putting the arrow in vitals, and ensuring that shots remain within the normal range of the crossbow, usually less than 35 yards. If you make a mistake, the best thing to do is take a break, relax for a while, then lower and then re-cock your bow on the ground.
To know details about how to make a hunting crossbow learn more.
Get a good rest
No matter what you think, no matter the strides made by manufacturers in reducing the weight of crossbows, after a short time in a stand, they can become heavy and heavy. That’s why the most effective crossbow stands come with shooting rails that are safe and secure. They can be used for shooting purposes that can assist in stabilizing the shot, but they also serve as a place to place the bow to rest. Every stand I have comes with one.